User manual

AMD2000 Series - Servo Drive - User Manual
30 DS619-0-00-0019 - Rev 0 ANCA Motion
B
STEP2 STEP 3 STEP 4
B
E
D
A
C
B
Figure 4-4 Mechanical Mounting of AMD2000 D2009 Servo Drive
STEP5
Connect appropriate electrical cables to complete installation as per sections 5 Planning
the Electrical Installation and 6 Power Wiring.
4.4.13 Un-Mounting a Drive
Ensure mains power has been isolated from the drives. (see 4.4.11 Power Isolation above)
STEP 1
Unplug the cables from the front of the drive to be un-mounted by carefully working the plugs from their sockets.
STEP 2
Follow steps 4 through to 2 of section 4.4.12 Mounting a Drive in reverse order.