User`s manual

A8520E24A91 – User’s Manual Page 15 of 36
Release Date 01/23/15
Anaren Integrated Radio (AIR)
accomplished by the use of warning labels and by providing users with information concerning
minimum separation distances from transmitting structures and proper installation of antennas.
The following statement must be included as a CAUTION statement in manuals and OEM
products to alert users of IC RF Exposure compliance:
Notice: To satisfy IC RF Exposure requirements for mobile and base station transmission
devices, a separation distance of 20 cm or more should be maintained between the antenna of
this device and persons during operation. To ensure compliance, operation at closer than this
distance is not recommended. The antenna(s) used for this transmitter must not be co-located
or operating in conjunction with any other antenna or transmitter.
Avis: Pour répondre à la IC d'exposition pour les besoins de base et mobiles dispositifs de
transmission de la station, sur une distance de séparation de 20 cm ou plus doit être maintenue
entre l'antenne de cet appareil et les personnes en cours de fonctionnement. Pour assurer le
respect, l'exploitation de plus près à cette distance n'est pas recommandée. L'antenne (s) utilisé
pour cet émetteur ne doit pas être co-localisés ou fonctionner conjointement avec une autre
antenne ou transmetteur.
If the A8520E24A91 module is used in a portable application (antenna is less than 20 cm from
persons during operation), the integrator/OEM is responsible for performing Specific Absorption
Rate (SAR) testing in accordance with IC rules and methods of RSS-102.
2.1.3. Europe (Conformité Européenne, )
The A8520E24A91 module has been certified for use in European countries covered by ETSI
regulations. The following tests have been performed and the module found to be compliant to
the requirements:
 Test standard ETSI EN 300 328 V1.8.1 (2012-04)
 RF Output Power
 Duty Cycle
 Occupied Bandwidth
 RF Output Power
 Spectral Power Density
 Transmitter Spurious Emissions
 Receiver Spurious Emissions
 Electro-Static Discharge and RF Immunity (ETSI EN 301 489-17)
 RF Exposure (ETSI EN 62311:2008)
 Safety (IEC 60950-1:2005 and EN 60950-1:2006)