MSDS
Material Safety Data Sheet U.S. Department of Labor
May be used to comply with Occupational Safety and health Administration
OSHA’S Hazard Communication Standard, (Non-Mandatory Form)
29 CFR 1910.1200. Standard must be Form Approved
consulted for specific requirements. OMB No. 1218-0072
Identity (As Used on Label and List)
Note: Blank Spaces are not permitted. If any item is not applicable, or no
Anaconda T
yp
e UA Gr
y
3/4”
information is available, the space must be marked to indicate that.
AEI PIN 34220
Weights per ft
Section I
Manufacturer’s Name Emergency Telephone Number
ANAMET Electrical, Inc. CHEMTREC 800-424-9300
Address (Number, Street, City, State, and ZIP Code) Telephone Number for Information
P.O. Box 39 217-234-8844
Date Prepared
1000 Broadway Avenue East JUNE 6, 2012
Signature of Preparer (optional)
Mattoon, Illinois 61938
Section II --- Hazardous Ingredients/Identity Information
Hazardous Components
(Specific Chemical Identity;
OSHA PEL ACGIH TLV
Other Info
%
Common Name(s))
CAS Number (mg/m³) (mg/m³) Weight grams/ft. Weight
Iron (Fe) 7439-89-6 10(Fe² O³ Fume) 5 (Fe² O³ Fume)
Balance
Balance
Alloying Elements:
Aluminum (Al) 7429-90-5
None established
10 – Max 0.108265
0.11
–
Max
Antimony (Sb) 7440-36-0
0.5 total
0.5 – Max 0.015466 0.02
–
Max
Carbon (C) 7440-44-0
None Listed
None established 0.193330 0.20
–
Max
Columbium 7440-03-1
None established
None established 0.077332 0.08
–
Max
Lead (Pb) 7439-92-1
0.05 as fume & dust
0.15 – Max 0.015466 0.02
–
Max
Manganese (Mn) 7439-96-5
5 as managnese
(C) 5 as dust; 1 as fume
1.507974 0.04
–
1.50
Nickel (Ni) 7440-02-0
1 mg TWA 1.5 mg TWA
0.231996 0.00
–
0.24
Phosphorous (P) 7723-14-0
None for inorganic
None for inorganic 0.115998 0.00
–
0.12
phosphates
phosphates
Rare Earth (Ce)
None established
None established 0.077332 0.00
–
0.08
Sulfur (S) 7704-34-9
13 as SO
2
5 sulfur dioxide 0.038666 0.00
–
0.04
Titanium (Ti) 7440-32-6
15 as TiO
2
10 total, 5 Respirable dust
0.231996 0.00
–
0.24
Vanadium (V) 7440-62-2
(C)0.5 as dust; and .1 as fume
0.05 as Resp dust and fume
0.154664 0.00
–
0.16
Zinc (Zn) 1314-13-2
5.0 total
5.0 as fume 14.151755 6.70
–
7.73
110 copper
7440-50-8
0.2 as copper 0.2 as copper 0.268078
0.00
–
0.27
Aluminum
7429-90-5
0.5 total 0.5 total 2.412698
0.00
–
2.46
PVC Polymer & Fillers 28.60710
11.49
–
17.68
Antimony Compounds
N010
0.5 mg Total 0.5 mg TWA 1.072634
0.182
–
0.911
Calcium Carbonate
1317-65-3
15 total 5 resp dust 10 total 5 resp dust 1.787724
0.000
–
1.823
TALC
14807-96-6
2 mg 2 resp dust 19.60973
0.000
–
2.363
Titanium Dioxide
13463-67-7
15 mg 10 mg ( total dust) 0.893862
0.000
–
0.911
Zinc Material Zn
1314-13-2
5.0 as fume
0.05 dust and fume
1.966496
0.547
–
1.458
Notes: (C) denotes “ceiling limit” which is not to be exceeded at any time
Section III ---- Physical/Chemical Characteristics
Boiling Point Specific Gravity (H
2
O = 1)
N/A N/A °F 6.527
Vapor Pressure (mm Hg.) Melting Point
N/A
340°F
Vapor Density (AIR = 1) Evaporation Rate
N/A
(Butyl Acetate = 1)
N/A
Solubility in water
Non Soluble
Appearance and Odor
Cover of various colors with metal core– Odorless
(Reproduced Locally) OSHA 174, Sept. 1985
PAGE 1
* U.S.G.P.O.; 1986-491-529/45775