Cut Sheet

ANACONDA SEALTITE
®
UL Listed, CSA Certified
Liquid-Tight Flexible Metal Conduit (LFMC)
Type UA
8 CAT-UA-160301 ANAMET Electrical, Inc.
Construction
• Constructed of continuously interlocked hot dipped
zinc galvanized steel core for exceptional crush and
corrosion resistance.
• Durable, sunlight resistant and ame retardant
thermoplastic PVC jacket that resists heat, oil and
chemical breakdown.
• Convieniet markings in feet for easy measurement
Installation
• Conduit used with standard liquid-tight tting for easy
installation. IP 67 Rated when installed with approved
ttings.
• Approved for both exposed and concealed locations.
Rated for temperature ranges -40ºF to + 176ºF (-40ºC
to +80ºC).
• Approved as an equipment grounding conductor in
sizes 3/8” through 1-1/4” if the total grounding path is 6
ft. or less, and the circuit conductors are protected by
overcurrent devices rated at 20 amps or less for 3/8”
and 1/2” and 60 amps or less for 3/4” through 1-1/4”.
• Suitable for use in hazardous locations per NEC
Articles 501 Class I Div. 2, Article 502 Class II
Div. 1 & 2, Article 503 Class III Div. 1 & 2.
• Manufactured in a full range of trade sizes from 3/8"
through 4".
• Approved for direct burial and in concrete trade sizes
3/8" through 4".
• Complies with UL Standard 360 File No. E18917; CSA
C22.2 File No. 158897; and NEC Article 350.
Square-Locked Design with integral bonding wire 3/8" through 1-1/4"
Interlocked Design 1-1/2" through 4" with no bonding wire
NEC Articles
• Article 250.118 (6) Equipment Grounding
• Article 300.22 (D) Information Technology Equipment
• Article 350 Liquid-Tight Flexible Metal Conduit (LFMC)
• Article 501.10 (B) (2) Class I Div. 2
• Article 502.10 (A) (2) and (B) (2) Class II Div. 1 & 2
• Article 503.10 (A) (3) and (B) Class III Div. 1 & 2
• Article 620.21 Elevator Wiring Methods
• Article 645.5 (E) (2) Under Raised Floors
See pages 23-28 for ttings
U.L. LISTED • CSA CERTIFIED • RoHS WEEE COMPLIANT
Type UA
Gray or Black thermoplastic PVC jacket with integral
bonding wire 3/8" through 1-1/4"
Product Specications Ordering Information
Approx
Inside Approx
Electrical Bend Weight
Trade Size Inside Diameter Outside Diameter Radius lbs. Small Carton Standard Carton Small Reels Standard Reels
Inches mm Inches Inches Inches PER Length NAED Length NAED Length NAED Length NAED
MIN. MAX. MIN. MAX. 100 FT. Feet PIN Feet PIN Feet PIN Feet PIN
3/8 12 .484 – .504 .690 – .710 3.0 25 100 34202 200 34201 800 34204 1500 34203
1/2 16 .622 – .642 .822 – .840 3.5 29 100 34212 200 34211 500 34214 1000 34213
3/4 21 .820 – .840 1.030 – 1.050 5.0 44 100 34222 150 34221 500 34228 1000 34229
1 27 1.041 – 1.066 1.290 – 1.315 6.0 73 100 34231 400 34238
1-1/4 35 1.380 – 1.410 1.630 – 1.660 7.0 100 50 34241 250 34248
1-1/2 41 1.575 – 1.600 1.865 – 1.900 5.5 112 50 34251 150 34254
2 53 2.020 – 2.045 2.340 – 2.375 7.0 148 50 34261 100 34268
2-1/2 63 2.480 – 2.505 2.840 – 2.875 9.5 182 25 34272 100 34274
3 78 3.070 – 3.100 3.460 – 3.500 15 255 25 34281 100 34284
3-1/2 91 3.500 – 3.540 3.960 – 4.000 16 314 25 34301 100 34304
4 103 4.000 – 4.040 4.460 – 4.500 17 362 25 34291 100 34294
Note: 1. Gray - Specication above.
2. Black - Change third number in NAED code to “0”.
3. Other Colors are available upon request.
4. 3/8” - 3/4” available in 25’ and 50’ cut lengths
5. Large reel sizes available upon request.
TYPICAL SPECIFICATION:
Conduit shall be Anaconda SEALTITE
®
Type UA. Conduit shall provide a exible liquid-tight raceway for wiring and shall be constructed of continuously interlocked
hot dipped zinc galvanized steel core with an integral bonding wire in sizes 3/8" thru 1-1/4". Conduit shall have a sunlight resistant and ame retardant PVC jacket in
electrical trade sizes 3/8" thru 4". Conduit shall be UL listed, CSA certied and IP 66/67 rated when installed with approved end ttings.
R