User's Manual

26
MENU OPTION: Wi-Fi SETUP
Wireless Setup: Enter the submenu by pressing
the enter button. Here you may setup a Wi-Fi
connection, turn Wi-Fi on or off, and reset Wi-Fi
settings.
Wireless Setup > From Play-Fi App: This option
puts the soundbar in Access Point Setup mode.
The soundbar will respond with “Open Play-Fi
App”. Please see the “DTS Play-Fi” section of this
manual for setup information.
Wireless Setup > Push Button Setup: This option
puts the soundbar in WPS mode. The sound-
bar will respond with “Press WPS Button” and
“Connecting...”. Please see the “DTS Play-Fi”
section of this manual for setup information.
Wi-Fi Setup > Reset Wireless: Enter the sub-
menu by pressing the enter button. Resetting will
clear the soundbar’s Wi-Fi configuration. This
function requires confirmation.
Wi-Fi Setup > Reset Wireless > No: Activate by
pressing the enter button. Choosing this option
will exit without resetting the Wi-Fi settings.
Wi-Fi Setup > Reset Wireless >Yes: Activate by
pressing the enter button. The soundbar will
respond with ‘Resetting’. After a reset there is no
way to recover the settings.
MENU OPTION: LEARN REMOTE
Please note: There may be remotes that the
soundbar cannot learn or that the soundbar can
not learn correctly. Due to the number of avail-
able remotes, it is impossible to advise which
remotes will or will not work.
Please note: When learning from a second
remote, you will likely find it does not have but-
tons that directly correspond with all available
soundbar commands. Not all commands have to
be programmed. Some remotes offer ‘function’
buttons (F1, F2, etc.) that can be used to program
unique soundbar commands such as ‘Bass
Mode: Night’ or ‘Input: HDMI 1’.
Please note: Some remote controls offer discrete
‘power on’ and ‘power off’ buttons. Some offer
a single button to toggle power on and off. The
learning function of the soundbar allows you to
program either scenario.
Learn Remote: Enter the submenu by pressing the
enter button. The settings in this menu program the
soundbar to respond to a second remote control.
The factory supplied remote control will always
work with the soundbar, even if the soundbar is
programmed to respond to a second remote.
Using the up/down directional buttons, you can
select and program the following commands:
• Volume +
• Volume –
• Mute
• Next Input
• Previous Input
• Up
• Down
• Left
• Right
• Enter
• Bass Mode: Night
• Bass Mode: Normal
• Bass Mode: Bass+
• Stereo Mode: Wide
• Stereo Mode: Voice+
• Stereo Mode: Normal
• Power Toggle
• Power On
• Power Off
• Menu
• Input: HDMI 3
• Input: HDMI ARC
Paradigm PW Soundbar Manual 102016.indd 26 2016-10-20 9:16 AM