User's Manual

24
your television and send audio information from
your television to your soundbar. This is useful if
you have multiple sources hooked up to both your
television and your soundbar and always want
your soundbar to play audio.
HDMI > HDMI ARC > Off (Default) or On: This option
turns the HDMI Audio Return Channel feature off
or on. Activate by pressing the enter button and the
soundbar will respond with ‘Saved’.
HDMI > HDMI CEC: Enter the submenu by pressing
the enter button. Here you may turn HDMI CEC on
and off. HDMI CEC (Consumer Electronics Control)
allows all compatible devices to be controlled by
one remote control and exchange remote com-
mands via the HDMI connection.
HDMI > HDMI CEC > Off (Default) or On: This
option turns the Consumer Electronics Control
feature off or on. Activate by pressing the enter
button and the soundbar will respond with ‘Saved’.
HDMI > HDMI Bypass: Enter the submenu by
pressing the enter button. Here you may choose
the HDMI input to use with standby HDMI bypass.
This feature allows the soundbar to send audio/
video signals from HDMI connected sources to
your television, even when you don’t want to power
on the soundbar and listen to audio through it.
HDMI > HDMI Bypass > Off (Default): This option
turns off the standby HDMI Bypass feature. When
the soundbar is in standby it will not pass audio/
video out of HDMI. Activate by pressing the enter
button and the soundbar will respond with ‘Saved’.
HDMI > HDMI Bypass > Last Used: This option
turns on the standby HDMI Bypass feature and
passes audio/video from the last HDMI input you
used while the soundbar is in standby mode.
Activate by pressing the enter button and the
soundbar will respond with ‘Saved’.
HDMI > HDMI Bypass > HDMI1 or HDMI2 or
HDMI3: This option turns on the standby HDMI
Bypass feature and passes audio/video from
the HDMI 1, HDMI 2, or HDMI 3 input while
the soundbar is in standby mode. Activate by
pressing the enter button and the soundbar will
respond with ‘Saved’.
HDMI > Lip Sync: Enter the submenu by pressing
the enter button. Here you may adjust the audio/
video sync for the HDMI inputs. Adjust this setting
if the timing of the audio content does not match
the video content.
HDMI > Lip Sync > HDMIARC or HDMI1 or
HDMI2 or HDMI3: Enter the submenu by press-
ing the enter button. Here you choose which input
you are adjusting lip sync for.
HDMI > Lip Sync > HDMIARC or HDMI1 or HDMI2
or HDMI3 > 0ms to 300ms: Using the up/down
directional buttons, choose the desired delay (from
0 milliseconds to 300 milliseconds). Adjust this
setting until the audio and video from your HDMI
sources are synchronized. If your audio and video
from HDMI sources is already synchronized, leave
this set to 0ms. Lip sync will be automatically set
to match the value currently displayed.
MENU: ANTHEM ROOM CORRECTION
Anthem Room Correction: Enter the submenu
by pressing the enter button. Here you may
turn Anthem Room Correction on and off. Using
proprietary processes, a microphone, and the
power of your PC, the ARC system analyzes
your soundbar’s in-room sound, then computes
the required correction to yield optimal perfor-
mance within your acoustic environment.
Anthem Room Correction > Off or On: This option
turns the Anthem Room Correction feature on or
Paradigm PW Soundbar Manual 102016.indd 24 2016-10-20 9:16 AM