User's Manual

17
DISPLAY
Anthem Room
Correction Status
Current Input
Custom Name
Volume Level
Wi-Fi Status Satus Current InputAudio Codec Status
Fig. 10
Your soundbar displays the following
information:
Wi-Fi Status: The Wi-Fi icon displays when a
Wi-Fi connection is established. If the soundbar
is configured to connect to a Wi-Fi network but
unable to connect, the icon will change to an
exclamation point.
Please note: The Wi-Fi Status LED on the
soundbar’s connection panel provides more
detailed feedback.
For information on Wi-Fi setup modes and
detailed setup instructions, please refer to the
“DTS Play-Fi and Network Connection” section
of this manual.
Audio Codec Status: If an audio signal with
surround sound encoding is detected this
icon will indicate Dolby
®
Digital or DTS Digital
Surround
™
.
Volume Level: Displays the current volume
level. Current Input: This icon indicates the
input that is currently active using its standard
input name. This field is not customizable.
Current Input Custom Name: This indicates
the input that is currently active using its
custom user defined name.
Anthem Room Correction Status: This icon
indicates that Anthem Room Correction is
active. This icon will not display if an Anthem
Room Correction has been manually turned off
or an adjustment curve has not been uploaded
to the soundbar. For information on setting up
ARC, please refer to the “(ARC
™
) Anthem Room
Correction” section of this manual.
Paradigm PW Soundbar Manual 102016.indd 17 2016-10-20 9:16 AM