User's Manual

28
not respond to incoming IP command when it is
powered off or in standby mode. If IP Control is set
to Off, Standby IP control is disabled.
MENU OPTION: Wi-Fi SETUP
Wireless Setup: Enter the submenu by pressing
the enter button. Here you may setup a Wi-Fi con-
nection, turn Wi-Fi on or off, and reset Wi-Fi settings.
Wireless Setup > From Play-Fi App: This
option puts the soundbar in Access Point Setup
mode. The soundbar will respond with “Open
Play-Fi App”. Please see the “DTS Play-Fi” section
of this manual for setup information.
Wireless Setup > Push Button Setup:
This option puts the soundbar in WPS mode. The
soundbar will respond with “Press WPS Button”
and “Connecting...”. Please see the “DTS Play-Fi”
section of this manual for setup information.
Wi-Fi Setup > Reset Wireless: Enter the sub-
menu by pressing the enter button. Resetting will
clear the soundbar’s Wi-Fi configuration. This func-
tion requires confirmation.
Wi-Fi Setup > Reset Wireless > No:
Activate by pressing the enter button. Choosing this
option will exit without resetting the Wi-Fi settings.
Wi-Fi Setup > Reset Wireless >Yes:
Activate by pressing the enter button. The sound-
bar will respond with ‘Resetting’. After a reset there
is no way to recover the settings.
MENU OPTION: LEARN REMOTE
Please note: There may be remotes that the soundbar
cannot learn or that the soundbar can not learn cor-
rectly. Due to the number of available remotes, it is
impossible to advise which remotes will or will not work.
Please note: When learning from a second remote,
you will likely find it does not have buttons that directly
correspond with all available soundbar commands.
Not all commands have to be programmed. Some
remotes offer ‘function’ buttons (F1, F2, etc.) that can
be used to program unique soundbar commands such
as ‘Bass Mode: Night’ or ‘Input: HDMI 1’.
Please note: Some remote controls offer discrete
‘power on’ and ‘power off’ buttons. Some offer
a single button to toggle power on and off. The
learning function of the soundbar allows you to
program either scenario.
Learn Remote: Enter the submenu by pressing
the enter button. The settings in this menu program
the soundbar to respond to a second remote con-
trol. The factory supplied remote control will always
work with the soundbar, even if the soundbar is pro-
grammed to respond to a second remote.
If you attempt to program a remote code from a
second that is already programmed the soundbar
will respond with “Failed”.
Using the up/down directional buttons, you can
select and program the following commands:
• Volume +
• Volume –
• Mute
• Next Input
• Previous Input
• Up
• Down
• Left
• Right
• Enter
• Bass Mode: Night
• Bass Mode: Normal
• Bass Mode: Bass+
• Stereo Mode: Wide