User's Manual

25
MENU OPTION: STEREO MODE
Stereo Mode: Enter the submenu by pressing the
enter button. Here, you may set how the soundbar
reproduces audio from 2-channel (stereo) sources.
Stereo Mode > Wide: This option configures
the soundbar to create a wider stereo image.
Activate by pressing the enter button, and the
soundbar will respond with ‘Saved’.
Stereo Mode > Voice+: This option config-
ures the soundbar to reproduce the left and right
channels with a simulated center channel. Activate
by pressing the enter button and the soundbar will
respond with ‘Saved’.
Stereo Mode > Normal: This option configures
the soundbar to reproduce the content using only the
left and right channels. Activate by pressing the enter
button and the soundbar will respond with ‘Saved’.
MENU OPTION: BASS MODE
Bass Mode: Enter the submenu by pressing the
enter button. Here you may adjust the bass equal-
ization of the soundbar. These options can also be
activated directly from the soundbar’s remote control.
Bass Mode > Bass+: This mode enhances
bass output. Activate by pressing the enter button
and the soundbar will respond with ‘Saved’.
Bass Mode > Normal: This mode returns the
bass to normal levels. Activate by pressing the enter
button and the soundbar will respond with ‘Saved’.
Bass Mode > Night: This mode decreases
bass output. Activate by pressing the enter button
and the soundbar will respond with ‘Saved’.
MENU OPTION: DISPLAY
Display: Enter the submenu by pressing the enter
button. The settings in this menu allow you to adjust
the brightness of the display and configure the dis-
play to automatically turn on and off.
Display > Bright: This option configures the
soundbar’s display to be on at full brightness when
the soundbar is on. Activate by pressing the enter
button and the soundbar will respond with ‘Saved’.
Display > Dim: This option configures the
soundbar’s display to be on at a reduced bright-
ness when the soundbar is on. Activate by
pressing the enter button and the soundbar will
respond with ‘Saved’.
Display > Auto Bright: This option configures
the soundbar’s display to be on at full bright-
ness when a setting (such as volume or input) is
changed. After a few seconds, the display will turn
off. Activate by pressing the enter button and the
soundbar will respond with ‘Saved’.
Display > Auto Dim: This option configures
the soundbar’s display to be on at a reduced
brightness when a setting (such as volume or input)
is changed. After a few seconds the display will
turn off. Activate by pressing the enter button and
the soundbar will respond with ‘Saved’.
MENU OPTION: HDMI
HDMI: Enter the submenu by pressing the enter but-
ton. Here you may adjust HDMI related settings.
HDMI > HDMI ARC: [HDMI Audio Return
Channel] Enter the submenu by pressing the enter
button. Here you may turn HDMI Audio Return
channel on and off. HDMI ARC allows you to
use one cable to pass video information from