User's Manual

21
ENTERING AND EXITING THE MENU
To access the menu from the remote, press
‘Menu’. To exit the menu from the remote, press
‘Menu’ again.
To access the menu from the control panel press the
menu button. To exit, press the menu button again.
The menu auto exits after 30 seconds.
NAVIGATING THE MENU**
The menu is navigated using the ‘up/down/left/
right/enter’ navigation system. Up and Down
are used to cycle through the menu and submenu
options. Right or Enter/Select are used to
access a submenu or to select an option. With
the remote, left is used to exit a submenu and go
back one level.
MENU OPTION: INSTALLATION
Installation: Enter the submenu by pressing the
enter button. The settings in this menu will adjust
the soundbar’s equalization and voicing for opti-
mal performance in shelf mount or wall mount
installations.
Installation > Shelf Mount: This option config-
ures the soundbar’s audio output to sound best in shelf
mount installations. The direction of the display screen
is also adjusted. Activate by pressing the enter button
and the soundbar will respond with ‘Saved’.
Installation > Wall Mount: This option con-
figures the soundbar’s audio output to sound best in
wall mount installations. The direction of the display
screen is also adjusted. Activate by pressing the enter
button and the soundbar will respond with ‘Saved’.
MENU OPTION: SUBWOOFER
Subwoofer: Enter the submenu by pressing the
enter button. Here you may configure external sub-
woofer integration. Please note: When integrating
the menu system
[Menu]
[Enter/Select] [Menu Down] [Menu Up]
Fig. 11
Fig. 12