Use Instructions

68
Cleaning the probe
You should wash the probe before its first use, after each use and again
before each subsequent use.
17. Tap Login.
18. If you don't have a username and password,
tap Register and follow the instructions
provided on the registration website.
Figure 5: Logging in to PeriCoach
Pairing the App and the probe" on page 20.
I get a "Device
not connected"
message.
The probe will turn off automatically if not used for
2 minutes. Turn it on. When it glows green at the
base, tap Connect to Device on your phone. The
base of the probe will turn blue and the PeriCoach:
Connected message appears on the screen.