Use Instructions

64
Figure 38: Place the probe in the charging case recess
2. Plug the USB cable that came with the kit into the port on the side of
the case.
3. If you are charging the probe from a PC, plug the other end of the USB
cable into a spare USB port on the PC. (The PC needs to be turned on for
charging to occur.) Continue with step 5.
4. If you are charging the probe from mains power, plug the other end of
the USB cable into the USB socket on the power adapter, plug the adapter
into a regular mains power outlet and turn on the power.
5. The end of the probe will glow purple while charging is occurring. When
the probe no longer glows purple, the battery is fully charged. Disconnect
the cable and remove the probe from the case. The probe is now ready for
use.
NOTE
If the probe doesn't glow purple during charging, see "Troubleshooting"
below.
Do not attempt to insert or use the probe while it is being
charged.