Use Instructions
33
Step 2
Inspect the probe thoroughly. If it is damaged-for example, the outer
covering has become cracked or torn-do not use it and ignore the rest of
this procedure. Contact Customer Service to discuss a replacement.
Step 3
Wash your hands thoroughly, preferably with an anti-bacterial soap.
Step 4
With washed and dried hands, turn on the probe.
You do this by removing it from the charging case. A green LED should
come on in the base of the probe as shown in Figure 6 on page 22. If the
green light does not come on, give the sensor a quick shake with your
hand.
The light should come on.
Step 5
Place the Smartphone within two metres of the probe and open the
PeriCoach app on the phone.
The PeriCoach: Connected message should appear on the screen and the
base of the probe glows blue. If this doesn't occur, the probe and the
phone have not been properly paired. Follow the instructions in "Logging
in to PeriCoach
Logging in to the PeriCoach system enables the system to store the results
of your exercises on a secure server and for you to be able to retrieve
them anywhere and at any time. (You might, for example, want to show
your doctor or clinician the results from following a particular exercise
regime.)
To login to the PeriCoach system:
7. Make sure your phone can connect to the internet.
8. If the PeriCoach app is not open, open it. You do this by tapping
once on the PeriCoach icon on one of the home pages on your
phone.