Use Instructions

23
Open the PeriCoach app and select Connect to Device. In the available
list, one of the items should have a name similar to "PeriCoach-
12345678901234" as shown in Figure 7. Tap on the name to initiate
pairing and connection. Select Pair when prompted.
Figure 7: Bluetooth devices list
In a few seconds, you should see Connected appear in the app and the
light in the base of the probe should turn solid blue.
If you don't see a PeriCoach Bluetooth device in the list of available
services after a couple of minutes, it may be because the probe has turned
off. (It has been designed to turn off automatically if it has not been used
for 2 minutes.) If the base of the probe is not showing a green light, it has
turned off. Repeat step 1 to turn it on again and then repeat this step.
Once connected, you will be returned to the app home screen where the
message PeriCoach: Connected appears on the screen.
If you get a Connection failed message, you may not have successfully
enabled Bluetooth on the phone. Repeat this procedure from step 1.