Use Instructions
22
Bluetooth communication has a limited range. For best performance, place
the Smartphone you are using within two metres of the PeriCoach probe.
Turn on Bluetooth on your phone.
On some phones, tapping Settings displays the Wireless and network list
as shown in Figure 2. If Bluetooth is off, tap On to turn it on. Consult the
instruction manual that accompanied your phone if you are unsure about
this.
Turn on the probe by removing it from the charging case. A green LED
should come on in the base of the probe as shown in Figure 6. If the
green light does not come on, give the sensor a quick shake with you
hand. The light should come on. The probe is now powered on and in
Bluetooth discoverable mode.
Figure 6: Location of LED lights.