User manual

FAQ - Frequently

asked questions

Note

it may work with lower baud rates without termination, but it is

recommended to use a termination.

Q: Receiving a NAK when sending a CAN telegram.

A: If no CAN partner is connected to the AnaGate CAN (aka the CAN network),

it is not possible to send CAN telegrams. The AnaGate CAN gets a NAK from

the CAN controller. These NAK errors are sent to the AnaGate client via a data

confirmation telegram.

Warning

If data confirmations are switched off no errors are sent to the

client. The option confirmations for data requests can be set via the

CANSetGlobals function. In High Speed Mode data confirmations are

always disabled.