User manual

Configuration
15 © 2007-2014 Analytica GmbH
Between two single digits a delay of 1 seconds is made, and between the IP address
and subnet mask two fast flashes are pulsed out.
Figure 2.8. AnaGate CAN Gateway, Example blinking output
2.9. Firmware update
The device firmware of the AnaGate CAN Gateway is updated via the integrated web
server of the device.
On the home page of the web server the current firmware information is displayed.
Figure 2.9. HTTP interface, AnaGate CAN duo
Proceed please as follows, in order to install the firmware on the AnaGate CAN
Gateway :
• Click Firmware on the left navigation bar to navigate to the Firmware-Upload page.