VTC805 Series Manual

Operation

The VTC805 is designed for simple operation. Before this unit can be put into operation, it must be properly installed

and connected. For more information, see Installation.

TO OPERATE THE UNIT

1. Connect the voltage converter to the load.

2. Connect the voltage converter to the power source, or if already connected, turn on the external switch installed at

the power source.

3. The Power LED will glow green indicating the presence of power on the Input and Output Connections.

4. The voltage converter will supply the load at 12 VDC for as long as it is connected.

TO OPERATE THE UNIT IN BOOST MODE

1. Flip the Power Switch on the front panel to the ON position.

2. Connect the voltage converter to the load.

3. Connect the voltage converter to the power source, or if already connected, turn on the external switch installed at

the power source.

4. The Power LED will glow green indicating the presence of power on the Input and Output Connections.

5. The voltage converter will supply the load at 24 VDC for as long as it is connected.

TO STOP OPERATING THE UNIT

1. To end operation, turn off external switch installed at the power source or disconnect the power source from the

voltage converter.

IMPORTANT: TURNING OFF THE POWER SWITCH WILL NOT TURN DISCONNECT THE INPUT FROM THE

OUTPUT! TURNING THE SWITCH OFF ONLY REDUCES THE OUTPUT VOLTAGE TO THE INPUT VOLTAGE!