Product Manual
3
IMPORTANT & SAFETY INSTRUCTIONS
1. SAVE THESE INSTRUCTIONS — This manual contains important safety and operating
instructions for this voltage converter.
2. Do not expose this voltage converter to rain or snow.
3. Use of an attachment not recommended or sold by the voltage converter manufacturer
may result in a risk of re, electric shock, or injury to persons.
4. Do not disassemble this voltage converter; take it to a qualied serviceman when service
or repair is required. Incorrect reassembly may result in a risk of electric shock or re.
5. To reduce risk of electric shock, disconnect this voltage converter from it power source
before attempting any maintenance or cleaning. Turning off the controls will not reduce
this risk.
6. CONVERTER LOCATION
i. Never place converter directly above battery; gases from battery will corrode and
damage converter.
ii. Never allow battery acid to drip on converter when reading gravity or lling battery.
7. DC CONNECTION PRECAUTIONS
i. Connect and disconnect DC output connections only after setting converter switch to
off position.
Analytic Systems, does not recommend the use of the VTC615 Series Voltage Converters
in life support applications where failure or malfunction of this product can be reasonably
expected to cause failure of the life support device or to signicantly affect its safety or
effectiveness. Analytic Systems does not recommend the use of any of its products in direct
patient care.
Examples of devices considered to be life support devices are neonatal oxygen analyzers,
nerve stimulators (whether used for anesthesia, pain relief, or other purposes), autotransfu-
sion devices, blood pumps, debrillators, arrhythmia detectors and alarms, pacemakers,
hemodialysis systems, peritoneal dialysis systems, neonatal ventilator incubators, ventilators
for both adults and infants, anesthesia ventilators, and infusion pumps as well as any other
devices designated as “critical” by the U.S. FDA.