Product Manual

9
Remote Control Option
A remote control panel may be connected to the voltage converter using a 9-pin D-connector
that attaches to the side of the voltage converter. The remote control panel and D connector
are part of the remote control option. The remote control panel allows the unit to be operated
remotely as well as duplicating all the diagnostic indicators and audible alarm.
This connector is located on the side of the unit. Important: To prevent the possibility of High
Voltage Electrical Shock, do not power up the Voltage Converter unless all wiring from the unit
to the remote is securely connected. Do not remove the dust cover from the DB-9 connector if
the remote is not being used.
IMPORTANT: This remote is to be used only on
Voltage Converters manufactured by Analytic Systems.