Product Manual

8
Remote Control Option
MPORTANT: This remote is to be
used only on Voltage Converters
manufactured by Analytic Systems.
A remote control panel may be connected to the converter using a 9-pin D-connector, which
attaches to the front panel of the voltage converter. The remote control panel and D connector
are part of the remote control option. The remote control panel allows the unit to be operated
remotely as well as duplicating all the diagnostic indicators and audible alarm
This connector is located on the side of the unit. Important: To prevent the possibility of High
Voltage Electrical Shock, do not power up the Converter unless all wiring from the unit to the
remote is securely connected. Do not remove the dust cover from the DB-9 connector if the
remote is not being used.