Product Manual
5
Designed and manufactured by: ANALYTIC SYSTEMS WARE (1993) LTD.
8128 River Way
Delta, BC V4G 1K5 Canada
p. 604.946.9981 f. 604.946.9983
tf. 800.668.3884 US/Canada
www.analyticsystems.com analyticinfo@analyticsystems.com Revised September 2014
Installation
MOUNTING
Mount the unit in a DRY location. Allow at least 1 inch of clearance around the unit for
adequate cooling.
POWER CONNECTION
A terminal strip is provided at one end of the unit for connecting the output leads. The input
leads are as shown above. Connect the leads as follows:
• Output Positive to OUT +
• Output Positive to OUT +
• Output Negative to OUT -
• Output Negative to OUT -
Ensure that the total average load connected does not exceed the continuous current rating of
the unit. The full load can be connected to one set of output terminals.
INPUT
VOLTAGE CONVERTER
OUTPUT
ii - II VDC
FUSE
oo.o VDC AGC XXA
XX AMP CONT.
ZZ AMP PEAK
MADE IN CANADA
514-369-4919
OUT
OUT
OUT
OUT
INPUT POWER
BLACK
RED
FUSE