SMP100 Manual
18
SolarMax Charge Controller Specications
Electrical Input Specications
PV Open Circuit Voltage (Voc) Max 230V
Input Range 30-250V
Input Amps (max) 100A
Input Protection No Internal Fuse, recommended 100A in-line circuit breaker or fuse.
Electrical Output Specications
Output Range 24, 28, 36, 48, 60, 72 V nominal battery voltage
Output Current (Max) 100A
Output Power (Max) 10KW
Typical Output Power 3-9KW
Standby Power Consumption 3W Max
Efciency 97%
Charge Type 3 Stage, Bulk, Absorption, Float
Supported Battery Chemistries Lead Acid (PbA)
Output Voltage Regulation User Programmable 24-100V
Battery Temperature Compensation User Programmable (mV/ °C)
MPPT Enabled Yes, Targets 5% of max power point
Status Display RS232- PC Interface
Output Protection No Internal Output Fuse, recommended 100A in-line output circuit
breaker or fuse
Data Logging PC Data logging software included
Operating Temperature Range -25° to +55°C with derating over +55°C
Conduit Connections 4x1 inch conduit connections
Mechanical Specications
Depth 17 in/ 434 mm
Width 8.2 in/ 208 mm
Height 3.5 in/ 89 mm or 2U
Clearance 1 inch (25 mm) all around
Material Anodized Marine Grade Aluminum
Finish Green Anodized
Fastenings All 18-8 Stainless Steel
Weight 17.0 lb / 7.7 kg
Connections Four contact terminals, AWG 1/0 Maximum gage
Warranty 3 years
Regulatory Approvals Certications: CSA and UL 1741. CE (pending).
US Patented No. 6,690,590