SMP100 Manual

17
Data Logging
Once the serial port and the conguration values have been set, the data logging can be
started.
To congure your data logging setup, click on Congure Data Logger.
To change the logging frequency, select a rate from the control. Click the Reset sampling
rate button to update the conguration and click Exit to return to the main screen. The next
session of logging will be at this new sampling rate.
The data logging le is saved in the Data folder. The le is formatted in the CSV format for
easy import into Excel.
The data format in the CSV le is as follows:
Unit ID, Date, Time, Vin, Iin, Vout, Iout, Pin, Pout