Product Manual

9
A remote control panel may be connected to the power supply using a 9-pin D-connector,
which attaches to the front panel of the battery charger. The remote control panel and D
connector are part of the remote control option. The remote control panel allows the unit to
be operated remotely as well as duplicating all the diagnostic indicators and audible alarm.
REMOTE CONNECTOR
This connector is located on the side of the unit. Important: To prevent the possibility of High
Voltage Electrical Shock, do not power up the Power Supply unless all wiring from the unit to
the remote is securely connected. Do not remove the dust cover from the DB-9 connector if
the remote is not being used.
IMPORTANT: This remote is to be used
only on Power Supplies manufactured
by Analytic Systems.
Remote Control Option