Specifications

7
REMOTE CONNECTOR
This connector is located on the side of the unit.
6
7
3
4
2
1
8
9
5
DRY CONTACT
ALARM RELAY
(OPTIONAL)
DRY CONTACT
ALARM RELAY
(OPTIONAL)
GROUND
COMMON FOR SWITCHES
REFERENCE VOLTAGE
FOR REMOTE OFF
+12 VDC
REMOTE OFF
CONNECT TO 5 TO FORCE
POWER SUPPLY TO OFF
OVER TEMP
NORMALLY HIGH (+12V)
GOES LOW ON
OVER TEMPERATURE
LOW BATTERY
NORMALLY HIGH (+12V)
GOES LOW ON
LOW BATTERY
NOT CONNECTED
LOW OUTPUT
NORMALLY HIGH (+12V)
GOES LOW ON
LOW OUTPUT
Note: All switches are electronic (solid state) not mechanical relays.
REMOTE CONTROL
A remote control panel may be connected to the
converter using a 9-pin D-connector which attaches to
the side of the converter. The remote control panel and
D connector are part of the remote control option. The
remote control panel allows the unit to be operated
remotely as well as duplicating all the diagnostic
indicators and audible alarm.