PWI320 Manual

9
1. The Output Power LEDs will indicate the approximate load percentage the Power Supply
is delivering.
2. The Output Power indicator LEDs will all blink GREEN any time the output current
reaches 100%.
3. The Output Power indicator LEDs will all blink YELLOW any time the output current
reaches 125%. If this happens frequently, the Power Supply is overloaded and the
number of devices connected must be reduced.
4. By use of the Power Wizard PC software, it is possible to customize the output voltage
in Power Supply mode within the working range of the unit (12.0 to 15.0 volts for a 12V
model, scale appropriately for other output voltages). Select the Active Prole and set the
desired voltage in the ‘Float Voltage’ eld and then press ‘Apply Changes’.
POWER SUPPLY INDICATORS
BLINKING
CURRENT < 10%
AC
TEMP SVCLO V
25 50 75
DEV FLTPS
CURRENT 11 - 39%
AC
TEMP SVCLO V
25 50 75
DEV FLTPS
CURRENT 40 - 59%
AC
TEMP SVCLO V
25 50 75
DEV
FLTPS
CURRENT 60 - 84%
AC
TEMP SVCLO V
25 50 75
DEV
FLTPS
CURRENT 85 - 99%
AC
TEMP
SVC
LO V
25 50 75
DEV FLTPS
CURRENT >= 100%
AC
TEMP
SVC
LO V
25 50 75
DEV FLTPS
CURRENT = 125%
AC
TEMP SVCLO V
25 50 75
DEV FLTPS