PWI320 Manual

12
FAULT INDICATORS
INSUFFICIENT INPUT VOLTAGE
AC
TEMP
DEV
SVC
FLT
LO V
PS
25 50 75
BLINKING
OUTPUT OVERLOAD/SHORT CIRCUIT
AC
TEMP
DEV
SVC
FLT
LO V
25 50 75
PS
OVER-TEMPERATURE
AC
TEMP
DEV
SVC
FLT
LO V
25 50 75
PS
POWER SUPPLY FAILED
POL
AC
TEMP
DEV
SVC
FLT
LO V
25 50 75
PS
Abbreviations and denitions
We use a number of abbreviations on the labels to save space. Here are the full words
corresponding to each abbreviation along with common battery Power Supply terms and their
denitions:
ABBREVIATIONS
DEV – Device. Refers to the Power Supply. Used together with the Fault LED to indicate a
problem with the Device.
FLT – Fault. Used to indicate a problem with the battery (BAT) or the device (DEV)
AC – Alternating Current
TEMP – Temperature. Used to indicate that the Device is too hot.
LO V – Low Voltage. Used to indicate that the Input Voltage is too low.
FAIL – Used to indicate that the device needs repair or replacement.
PRG – Program - Button used to initiate the Programming Mode (not used)
SEL – Select – Button used to make choices during front panel programming (not used)
PS – Power Supply