IPSi365 Series Manual

Operation

This unit is designed for simple operation. Before operating, the inverter must be properly

installed and connected. See Installation and AC/DC Connections for more information.

TO OPERATE THE INVERTER:

1. Move the Power Switch to ON to energize the circuitry.

2. The Invert LED and either the 50 Hz or 60 Hz LED will glow green indicating proper

operation and the presence of AC power at the outputs.

3. The inverter will automatically begin supplying the connected load with voltage and

current printed on its label.

TO END OPERATION:

1. Move the Power Switch to OFF to end operation.

2. Wait for all the LEDs to turn off.

3. The inverter can now be safely disconnected from the load and power source. It can then be

serviced or put into storage.