IPSi365 Series Manual
54
Introduction
The IPSi365 series of Intelligent Pure Sinewave Inverters are designed specically for
powering computers and other sensitive AC loads in rugged, mobile, off-grid environments.
They produce pure sinewave AC power, identical to a conventional AC outlet.
Internally, the IPSi365 is controlled by a sophisticated Digital Signal Processor (DSP) for
optimal control and the most efcient operation possible. The heavy-duty Toroidal Power
Transformer steps the low voltage AC produced by the Power MOSFET Transistors to 110 or
220 VAC at 50 or 60 Hz. Additional ltering on the AC output reduces or eliminates EMI noise
that can interfere with sensitive communications equipment.
Built for the safest operation possible, this unit features low voltage warning with shutdown
circuitry to protect the DC power source. While the inverter is safeguarded by high voltage
and over temperature protection both with shutdown circuitry. All the alarm conditions can
be monitored on the bright LED indicator display which can also be mirrored on the optional
remote control panel.
Using the free-to-download InverterWizard software from Analytic Systems, you can change
the output frequency, adjust the voltage shutdown thresholds and view and record operating
data from any PC with a standard USB interface.
The box you have received should contain the following:
• 1 IPSi365 Intelligent Pure Sine Inverter
• 1 compatible USB cable
• 1 Warranty Card
• This User Guide (A PDF copy can be downloaded from www.analyticsystems.com)
• Optional InverterWizard software can be downloaded from www.analyticsystems.com
Box Contents
If anything is missing or damaged please contact your dealer or Analytic Systems for a replacement.