IPSi3600 Manual

4
Specications
Electrical (Input)
Nominal (ip) 24, 28, 32 or 36 VDC 48 or 72 VDC
Actual (Vdc) 20 - 45 40 - 80
Input Amps (max) 180 90
Electrical (Output)
Output Volts Nominal 110 VAC 220 VAC
Output Amps Actual (AC) 110 ± 10 VAC (user adjustable) 220 ± 20 VAC (user adjustable)
Output Amps 30A (cont) / 36A (peak) 15A (cont) / 18A (peak)
Output Frequency 50.00 or 60.00 Hz ± 0.01 Hz (user selectable)
Output Distortion < 2% at 3600 Watts into resistive load
Regulation (Line & Load) < +/-2%
Duty Cycle Continuous 100% for 24 hours per day
Efciency >90% @ Maximum Continuous Output
* Specications subjects to change without notice.
Environmental
Operating Temperature Range -25°C to +40°C @ maximum output (-40°C Optional)
Humidity
0 - 95% Relative Humidity
(non-condensing) with standard conformal coating
Audible < 34.5 dB @ 3 ft / 1 meter
Typical Service Life >10 years (87,600 hrs)
Isolation Input to Output, Output to Case & Input to Case 1500 VDC
General
Length 15.6 +/- 0.1 in / 39.7 +/- 0.3 cm
Width 12.0 +/- 0.1 in / 30.5 +/- 0.3 cm
Height 8.0 +/- 0.1 in / 21.3 +/- 0.3 cm
Clearance 1 Inch (2.5 cm) all around
Material Marine Grade Aluminum
Finish Black Anodize / Powder Epoxy
Fastenings 18-8 Stainless
Weight 69.5 lb / 13.5 kg
Connection
DC In – 3/8 x 16 Inch Imperial Threaded Studs c/w nuts
AC Out – 2 x 20A 125V NEMA 5-15 receptacles or 2 x 16A 250V CEE 7/7
receptacles with circuit breaker protection, plus one 30A hardwire connection
AC In – one 30A hardwire connection