Product Manual
IMPORTANT & SAFETY INSTRUCTIONS
1. SAVE THESE INSTRUCTIONS — This manual contains important safety and operating
instructions for the inverter.
2. Do not expose the inverter to rain or snow.
3. Use of an attachment not recommended or sold by the inverter manufacturer may result
in a risk of re, electric shock, or injury to persons.
4. Do not disassemble the inverter; take it to a qualied serviceman when service or repair
is required. Incorrect reassembly may result in a risk of electric shock or re.
5. To reduce risk of electric shock, disconnect the inverter from the input power before at-
tempting any maintenance or cleaning. Turning off controls will not reduce this risk.
6. Never place the inverter directly above a battery; gases from the battery will corrode and
damage the inverter.
7. Never allow battery acid to drip on the inverter.
GROUNDING AND AC POWER CORD CONNECTION INSTRUCTIONS — Inverters
should be grounded to reduce risk of electric shock. This inverter is equipped with a chassis
grounding stud, and electric receptacles capable of accepting an equipment-grounding
conductor and a grounding plug.
LIFE SUPPORT — Analytic Systems does not recommend the use of the IPSi1200 Series
Inverters in life support applications where failure or malfunction of the product can be
reasonably expected to cause failure of the life support device or to signicantly affect its
safety or effectiveness. Analytic Systems does not recommend the use of any of its products
in direct patient care. Examples of devices considered to be life support devices are neonatal
oxygen analyzers, nerve stimulators (whether used for anesthesia, pain relief, or other
purposes), autotransfusion devices, blood pumps, debrillators, arrhythmia detectors and
alarms, pacemakers, hemodialysis systems, peritoneal dialysis systems, neonatal ventilator
incubators, ventilators for both adults and infants, anesthesia ventilators, and infusion pumps
as well as any other devices designated as “critical” by the U.S. FDA.