Product Manual
3
SAVE THESE INSTRUCTIONS — This manual contains important safety and operating
instructions for the Inverter.
1. Do not expose the Inverter to rain or snow unless it is a sealed model.
2. Use of an attachment not recommended or sold by the Inverter manufacturer may result
in a risk of electric shock, re, or injury to persons.
3. Do not disassemble the Inverter; take it to a qualied serviceman when service or repair
is required. Incorrect reassembly may result in a risk of electric shock or re.
4. To reduce risk of electric shock, disconnect the Inverter from the input power before at-
tempting any maintenance or cleaning. Turning it off will not reduce this risk.
5. Never place the Inverter directly above a battery; gases from the battery will corrode and
damage the Inverter.
6. Never allow battery acid to drip onto the Inverter.
HEAVY DEVICE - The IPSi1200 Inverters weigh approximately 30lbs. Please use appropriate
safety measures when lifting or moving these units.
Medical Equipment Notice
Analytic Systems does not recommend the use of their products in life support
applications where failure or malfunction of the product can be reasonably
expected to cause failure of the life support device or to signicantly affect its
safety or effectiveness. Analytic Systems does not recommend the use of any
of its products in direct patient care. Examples of devices considered to be life
support devices are neonatal oxygen analyzers, nerve stimulators (whether used
for anesthesia, pain relief, or other purposes), auto-transfusion devices, blood
pumps, debrillators, arrhythmia detectors and alarms, pacemakers, hemodialysis
systems, peritoneal dialysis systems, neonatal ventilator incubators, ventilators
for both adults and infants, anesthesia ventilators, and infusion pumps as well as
any other devices designated as “critical” by the U.S. FDA
GROUNDING AND AC POWER CORD CONNECTION INSTRUCTIONS — Inverters
should be grounded to reduce risk of electric shock. This Inverter is equipped with a
chassis grounding stud and electric receptacles capable of accepting an equipment-
grounding conductor and a grounding plug.
INVERTER
IMPORTANT SAFETY INSTRUCTIONS