Product Manual

14
General
Efciency > 90% @ maximum output
Temp. Range -25°C to +40 C° @ maximum output
Isolation Input-Output, Input-Case & Output-Case: 1500 VDC
Length 13.0 in / 33.0 cm
Width 9.0 in / 22.9 cm
Height 7.8 in / 19.8 cm
Clearance 1 Inch (2.5 cm) all around
Material Marine Grade Aluminum
Finish Black Powder Epoxy/Black Anodized
Fastenings 18-8 Stainless
Weight 30 lb / 13.6 kg
Warranty Thee Years Parts and Labor
Specications
Input
Nominal Voltage 125 VDC
Actual Voltage 100 - 140 VDC
Input Amps (max) 14.0 A
Input Fuse None, external fuse or breaker required
Input Connection 1 30 Amp, 250V Rated CSA/UL Approved Terminal Block, Red for Positive, Black for Negative
Output
Voltage 110 +/- 2 VAC 220 +/- 4 VAC
Output Amps (cont) 11.0 A 5.5 A
Output Amps (max) 14.0 A 7.0 A
Output Frequency 50.00 ± 0.01 or 60.00 ± 0.01 Hz
Regulation (Line & load) < +/- 2.0%
Output Distortion <2% at 1200 Watts into resistive load
Duty Cycle Continuous: 100% for 24 hours per day, Peak: 10 minutes per hour.
Output Connection
• 1 Circuit Breaker Protected 15A NEMA 5-15 AC Receptacle
• 1 30A, 250V Rated CSA/UL Approved Hard Wire Phoenix VDFK4 Terminal Block,
Black for Hot, Green for Ground and Grey for Neutral
* Specications subjects to change without notice.
Designed and manufactured by: ANALYTIC SYSTEMS WARE (1993) LTD.
8128 River Way
Delta, BC V4G 1K5 Canada
p. 604.946.9981 f. 604.946.9983
tf. 800.668.3884 US/Canada
www.analyticsystems.com [e-mail] Revised December 2015