Product Datasheet

8128 River Way, Delta B.C. V4G 1K5 Canada T. 604.946.9981 F. 604.946.9983 TF. 800.668.3884 (US/CANADA)
www.analyticsystems.com
An ISO9001 and AS9100 Registered Company Battery Chargers • Inverters • Power Supplies • Voltage Converters
IDEAL
BATTERY ISOLATOR
MODEL
IBI2 & IBI3 Series
Description
Analytic Systems introduces the IBI (Ideal Battery Isolator) for 2 bank
and 3 bank battery systems, allowing all the batteries to be fully
charged from a single alternator while maintaining electrical isolation
between the battery banks.
Ideal Diode technology uses MosFet Transistors and control circuitry
to replace the diode used in a traditional battery isolator and reduces
the voltage drop across the isolator to a mere 160 millivolts at 200
Amps of charging current and essentially zero volts at low current, so
all the power of the alternator is applied to the batteries ensuring a full
recharge every time.
While the Ideal Battery Isolator is designed to be used with an
alternator, it can also be used to convert a single bank battery charger
to a 2 or 3 bank charger.
Benets
• All batteries charge when engine running, regardless of master
switch setting
• Batteries isolated from each other when engine off
• Complete battery charging due to very low voltage drop, only 0.16
volts at 200 amps and 0.016 volts at 20 amps
• 200 Amp current carrying capacity ensures compatibility with
almost every alternator
Design Features
• All circuitry sealed in epoxy for water resistance
• The alternator can be directly wired to the batteries through the isolator
• CNC machined connection points and bronze fasteners ensure low
resistance connections
• Internal high current busbar for optimal current distribution
• Compatible with 12, 24, 28 and 32 volt battery systems
• Can also be used with a single output battery charger
• Extremely compact design saves space
Available in three colours
Top / mounted view
Top / mounted view