Product Manual

11
To save the conguration and exit Setup at any point in the process, press and hold the PRG
button for 3 seconds until you hear a one second beep.
To exit without saving, either press the On/Off button or do nothing. The charger will exit
the conguration mode without changing the stored conguration after 60 seconds elapses
without any button being pressed.
Two additional adjustments can be made from the front panel. These are to select the charging
prole as well as the behavior of the charger at the conclusion of a recharge cycle.
Saving
Exit without Saving
Front Panel Adjustments
DEFAULT BATTERY TEMPERATURE INDICATORS
DEFAULT BATTERY TEMP 10C
POL
BAT
TEMP
AC COLD HOTWARM
BLINKING
AUTO BATTERY TEMP
DEFAULT BATTERY TEMP 25C
DEFAULT BATTERY TEMP 35C
POL
BAT
TEMP
AC COLD HOTWARM
POL
BAT
TEMP
AC COLD HOTWARM
POL
BAT
TEMP
AC COLD HOTWARM