Product Manual

10
Depending on the size and type of the battery or batteries connected to the charger, the
standard charging current output of the charger may be more than is optimal or recommend-
ed. Refer to the documentation from your battery manufacturer to determine the maximum
safe charging current. If needed, the maximum charging current can be reduced to 25, 50 or
75 percent of the rated output of the charger. The three LED’s on the top will indicate 25%,
50% and 75% respectively. All three LED’s will be simultaneously lit to indicate 100% charg-
ing current (Default).
Power Limit
CHARGE POWER INDICATORS
MAX CURRENT 25% OF RATED
MAX CURRENT 75% OF RATED
BLINKING
MAX CURRENT 50% OF RATED
MAX CURRENT 100% OF RATED
AC
POL
25%
POWER
LIMIT
75%50%
AC
POL
25%
POWER
LIMIT
75%50%
AC
POL
25%
POWER
LIMIT
75%50%
AC
POL
25%
POWER
LIMIT
75%50%
The recommended charging voltage for any type of battery will vary with temperature. The
warmer the battery, the lower the charging voltage required. This adjustment will set the
battery temperature to use for charge compensation if there are no installed battery tempera-
ture sensors. The three top LED’s indicate Cold, Warm, Hot and Auto. Cold, Warm and Hot and
correspond to battery temperatures of 10, 25 and 35 degrees Celsius respectively. In Auto, the
charger measures its own internal temperature during startup, and estimates the batteries
to be the same temperature and applies the appropriate compensation (Default).In the event
the charger detects one or two battery temperature sensors, their measurements will take
precedence.
Default Battery Temperature