BCDi320 Manual
22
Specications
Input
Volts (VDC) 100-350 VDC
Current (max) * 4 Amps w. Inrush Protection
Input Fuse 6.3A 400 VDC
Power Factor > 0.99 at Full Load
Efciency > 90% at Full Load
*Maximum Input Current Specied at 85 VAC
Output
Nominal Voltage 12 VDC 24 VDC 28 VDC 32 VDC 36 VDC 48 VDC
Voltage Range (VDC)** 12.0-15.5 24.0-31.0 28.0-36.2 32.0-41.3 36.0-46.5 48.0-62.0
Output Current 20 A 10 A 8 A 7.5 A 7 A 5 A
Recommended Battery (Amp-
Hours)
100 50 45 40 33 25
Standard. Temperature
Compensation
-15mV/C -30mV/C -35mV/C -40mV/C -45mV/C -60mV/C
Number of Battery Banks 1 or 2
Charging Stages 2 or 3 stage (user-selectable)
End of Charge Float or Rest (user-selectable)
** Actual Output Voltage determined by User Settings or by Charger Firmware
Mechanical
Dimensions 9.5 in./24.1 cm Long x 8.0 in./20.3 cm Wide x 3.25 in./8.3 cm High
Clearance 2.0 in./5.0 cm all around
Weight 6.2 lb / 2.8 kg
Material and Finish Marine Grade Black Anodized Aluminum with 18-8 Stainless Fasteners
Mounting Wall or Shelf Mount
Connections DC Output - 2x Phoenix VDFK Terminal Block (Red and Black)
AC Input - Input Type-D #14AWG Leads (Red: Positive, Black Negative)
Environmental and Safety
Operating Temperature Range -25°C+ to +40°C (-40°C to +55°C Optional)
Storage Temperature Range -55°C to +85°C
Humidity 0 - 95% Relative Humidity (non-condensing)
Vibration Built to meet MIL810g
Emissions Complies with FCC Class B, Part 15
Isolation > 1500 VDC Input-Output, Input-Case, Output-Case
Audible Noise None (Ø db)
Duty Cycle Continuous
Warranty Five Years Parts and Labor
Safety Built to meet ABS, CE, UL458 and CSA 22.2.107.1
* Specications subjects to change without notice.