BCD805W Series Manual

5
Introduction
The BCD805W-12-24 DC-DC battery charger provides up to 800 watts of power to charge a
24 volt battery system from a 12 Volt DC source. In absence of a battery, the unit can also be
used as a DC-DC voltage converter up to the continuous current rating of the unit. The unit is
Non-Isolated and Common Negative meaning that there is a direct connection between the
Input Negative and Output Negative.
The recently updated single board design features parallel boost mode pulse width modulated
converters for power handling and reliability and has multiple stages of ltering to reduce
radiated or conducted noise to very low levels.
The BCD805W-12-24 is constructed to be dust tight and water resistant in accordance to
IP66 standards. The unit is designed to operate under temperature extremes ranging -40°C to
+55°C and is protected against shock and vibration.
Safety features include over-temperature shutdown with automatic recovery, current limiting,
short circuit protection with automatic recovery, input undervoltage shutdown, output
overvoltage protection, and both input and battery reverse connection protection.
Box Contents
The box you have received should contain the following:
• One BCD805W-12-24 DC-DC Battery Charger
• This manual
• One Warranty Card
If anything is missing or damaged please contact your dealer or Analytic Systems for a replacement