BCD805W Series Manual
10
Specications
Input Specications
Input Voltage Range 11 to 15 VDC
Inrush Current 80 Amps Peak
Input Amps 85A Maximum (at 11.0 VDC In)
Circuit Protection 125 Amp External Fuse Required at Battery
Noise on Input < 50mV p-p
Output Specications
Output Volts 27.2 VDC
Output Current 30 Amps Continuous
Output Fuse AGC 40 Amp
Efciency > 85% at 20 Amps Out
Regulation (Line or Load) +/- 1.0% max.
Noise and Ripple < 100mV p-p @ 20A Load
Output Overvoltage Protection 34 VDC Non-Latching (Inhibits PWM, automatic reset)
Charging Stages 2 - Constant Current to Constant Voltage
Mechanical Specications
Case Material Black Anodized Extruded Aluminum Chassis, Black Anodized sheet
aluminum Front and Rear Panels, with 18-8 Stainless Fasteners
Audible Noise none, 0 db
Connections Input and Output - Marathon ST722B2502UH
Status - MS3112E8-4S
Dimensions 16.0 in / 40.6 cm Long x 8.0 in/ 19.3 cm Wide x 3.8 in / 9.7 cm High
Weight 17.5 lbs / 7.9 kg
Workmanship Manufactured in accordance with IPC-A-610
Isolation 500 VDC Input or Output to Case, Input to Output Common Negative
Environmental Specications
Operating Temperature -40°C to 60°C
Storage Temperature Range -50°C to 85°C
Cooling Convection Cooling via Case, 1 Inch Clearance all around recommended
Vibration Per MIL-STD 810G, Method 514-3, Cat-I Proc I
Shock Per MIL-STD 810G, Method 516-3, Proc 11, IV, VI
Humidity 0 - 95% Non-Condensing
Ingress Protection Designed to meet IP66 for water and dust protection
EMC – conducted emissions Designed to meet MIL-STD-461F: CE102, g CE102-1, 10kHz to 10MHz.
EMC – radiated emissions Designed to meet MIL-STD-461F: RE102, g RE102-4, 2MHz to 1GHz.