Product Manual

9
Remote Control Option
A remote control panel may be connected to the
converter using a 9-pin D-connector, which attaches
to the side of the battery charger. The remote control
panel and D connector are part of the remote control
option. The remote control panel allows the unit to
be operated remotely as well as duplicating all the
diagnostic indicators and audible alarm.
REMOTE CONNECTOR
This connector is located on the side of the unit. Important: To prevent the possibility of High
Voltage Electrical Shock, do not power up the battery charger unless all wiring from the unit to
the remote is securely connected. Do not remove the dust cover from the DB-9 connector if the
remote is not being used.
IMPORTANT: This remote is to be used only on Battery Chargers manufactured by
Analytic Systems.