Product Manual

10
Special Services & Options
Conformal Coating INCLUDED ON ALL UNITS UNLESS REQUESTED NOT TO as of April 1, 2014
Option “c” Ruggedization Package (EXTRA Conformal Coating and RTV Compound)
Option “v” Marine / Industrial Pkg (EXTRA Conformal dipping and RTV Compound)
Option “MS” Military Pkg
(incl. Wide Temp Components, Conformal Dipping and RTV Compound)
Option “w” Wide Temperature Operation (-40 to +55 C, incl)
Option “SM” High Voltage Protection on the DC Input Side
Option “d” Paralleling Diodes
Option “FI” Forklift Modi cations
Option “F” Open Frame - No chassis just heat sink bars (not for all products)
Special Input
There is no charge for nominal output voltages (ie. 12.0, 24.0, 48.0), but this
must be noted at the time of order (Contact Factory for details)
Special Output
Water tight options IP66, IPS67, IPS68
Remote Control Option
IMPORTANT: This remote is to be used only on Battery Chargers manufactured by
Analytic Systems.
REMOTE CONNECTOR
This connector is located on the side of the unit. Important: To prevent the possibility of High
Voltage Electrical Shock, do not power up the battery charger unless all wiring from the unit
to the remote is securely connected. Do not remove the dust cover from the DB-9 connector if
the remote is not being used.
A remote control panel may be connected to the
battery charger using a 9-pin D-connector that
attaches to the side of the battery charger. The
remote control panel and D connector are part
of the remote control option. The remote control
panel allows the unit to be operated remotely as
well as duplicating all the diagnostic indicators
and audible alarm.