Product Manual

10
A remote control panel may be connected to the inverter using a 9-pin D-connector, which
attaches to the front panel of the battery charger. The remote control panel and D connector
are part of the remote control option. The remote control panel allows the unit to be operated
remotely as well as duplicating all the diagnostic indicators and audible alarm.
IMPORTANT: This remote is to be used only on Battery Chargers manufactured by Analytic
Systems.
REMOTE CONNECTOR
This connector is located on the side of the unit. Important: To prevent the possibility of High
Voltage Electrical Shock, do not power up the battery charger unless all wiring from the unit to
the remote is securely connected. Do not remove the dust cover from the DB-9 connector if the
remote is not being used.
Remote Control Option