Owner's manual

Oberkorn User Manual

Basic Hook Up | Analogue Solutions

BASIC HOOK UP

To control a typical analogue synth, the most basic and common way to set up is as follows;

Oberkorn Output Synth Input

Pitch: VOLTAGE OUT A CV (pitch) / Key CV

Gate: GATE OUT X Gate / Trig / V-Trig

Cutoff: VOLTAGE OUT B VCF

Note: different synth’s will label their inputs differently.

That’s a basic set-up. If you are new to analogue synth’s you may just want to stick with that

for starters, just to get used to using the set-up. But more advanced users really should do a

little more than the above! I’ll give more advanced examples later.