Certifications 2

according to Regulation (EC) No 1907/2006
Safety Data Sheet
Phono-Zubehör-Vertrieb GmbH
Old Frank‘s Genuine Vinyl Washing Liquid
Revision date: 06.10.2020 Page 3 of 8
Product code: 6242
Usual measures for fire prevention.
Advice on protection against fire and explosion
General protection and hygiene measures: See section 8.
Further information on handling
7.2. Conditions for safe storage, including any incompatibilities
Keep container tightly closed in a cool, well-ventilated place.
Requirements for storage rooms and vessels
Do not store together with: Explosives. Oxidizing solids. Oxidizing liquids. Radioactive substances. Infectious
substances. Food and animal feedingstuff.
Hints on joint storage
Keep the packing dry and well sealed to prevent contamination and absorbtion of humidity.
Recommended storage temperature: 20°C
Protect against: frost. UV-radiation/sunlight. heat. Humidity
Further information on storage conditions
7.3. Specific end use(s)
See section 1.
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
To date, no national critical limit values exist.
Additional advice on limit values
8.2. Exposure controls
Technical measures and the application of suitable work processes have priority over personal protection
equipment.
Provide adequate ventilation.
Appropriate engineering controls
Always close containers tightly after the removal of product. When using do not eat, drink, smoke, sniff. Wash
hands before breaks and after work.
Protective and hygiene measures
Wear safety glasses; chemical goggles (if splashing is possible). BS/EN 166
Eye/face protection
In case of prolonged or frequently repeated skin contact:
Wear suitable gloves.
Suitable material:
FKM (fluororubber). - Thickness of glove material: 0,4 mm
Breakthrough time >= 8 h
Butyl rubber. - Thickness of glove material: 0,5 mm
Breakthrough time >= 8 h
CR (polychloroprenes, Chloroprene rubber). - Thickness of glove material: 0,5 mm
Breakthrough time >= 8 h
NBR (Nitrile rubber). - Thickness of glove material: 0,35 mm
Breakthrough time >= 8 h
PVC (Polyvinyl chloride). - Thickness of glove material: 0,5 mm
Breakthrough time >= 8 h
The selected protective gloves have to satisfy the specifications of EU Directive EC/2016/425 and the standard
EN 374 derived from it.
Before using check leak tightness / impermeability. In the case of wanting to use the gloves again, clean them
before taking off and air them well.
Hand protection
Print date: 12.10.2020GB - ENRevision No: 1,0