Manual

TETRA VIO Chapter 7 : TECHNICAL SPECIFICATIONS (continued)
7-1. COMPUTER & VIDEO INPUTS (continued)
• S.VIDEO (Y/C)
Connectors: 4-pin mini DIN (AUX input), RCA (AUX input), BNC (input #1), HD15 (inputs #1 & AUX) and
DVI-I (input #2).
Standards: PAL / SECAM (15.625 kHz - 50 Hz - 625 lines)
NTSC (15.734 kHz - 60 Hz - 525 lines).
Levels: Y: 1 Vp/p.
C: 0.3 Vp/p.
Impedance: 75 ohms.
• COMPOSITE VIDEO
Connectors: BNC (input #1), RCA (AUX input), HD15 (inputs #1 & AUX) and DVI-I (input #2).
Standards: PAL / SECAM (15.625 kHz - 50 Hz - 625 lines)
NTSC (15.734 kHz - 60 Hz - 525 lines).
Black & White (15.625 kHz - 50 Hz - 625 lines)
Black & White (15.734 kHz - 60 Hz - 525 lines).
Level: 1 Vp/p.
Impedance: 75 ohms.
• SD-SDI
Connector: BNC (input #3).
Signal: Serial Digital Interface (YUV - 4.2.2 - 10 bits - 270 Mbps)
Impedance: 75 ohms.
• HD-SDI
Connector: BNC (input #3).
Data rate: Serial Digital Interface (YUV - 4.2.2 - 10 bits - 1.485 Gbps)
Impedance: 75 ohms.
7-2. GENLOCK INPUT
Connector: BNC.
Standards: Black burst PAL or NTSC.
HD black.
Levels: 1 Vp/p.
Impedance: 75 ohms.
PAGE 31