Manual

Chapter 4 : FRONT PANEL DISPLAY MENUS DESCRIPTION (continued) TETRA VIO
4-5. FUNCTIONS DESCRIPTION
[INPUT]
[Input status]
Indicates the status of the selected input.
[Auto settings]
This function detects automatically the input type of the source connected to the input connectors (DVI & RGB).
Then the device performs an auto-centering function.
[Input ---]
Input type selection. Select an input then make the following adjustment:
[Input type]: Select the type of the source connected to the corresponding input between:
• [SDTV Composite]
• [SDTV Y/C]
• [SDTV YUV]
• [Video RGBS]
• [Video RGsB]
• [Computer HV/C]
• [Computer SOG]
• [Computer B&W]
• [DVI video RGB]
• [DVI video YUV]
• [DVI Comp 0-255]
• [DVI Comp 16-235]
• [SDI video]
NOTE: For [SDTV Composite] and [SDTV Y/C], select the video standard between:
• [Auto]: automatic NTSC, PAL and SECAM standard detection.
• [NTSC]: NTSC standard detection only.
• [PAL]: PAL standard detection only.
• [SECAM]: SECAM standard detection only.
• [B & W 50/60 Hz]: Black and White detection.
[H sync load]
H Sync. input load selection.
[Audio input]
This function allows to assign the needed Audio input channel to the selected Input---. Select the
corresponding audio input.
[Analog A]
[Analog B]
[Analog C]
[Analog Front]
[SPDIF]
[Embedded SDI]
PAGE 22