User guide

SMX System MultiMatrix Switcher • SIS Configuration and Control 56
Command/Response Table for IP SIS Commands
Command ASCII Command
(Host to Switcher)
Response
(Switcher to Host)
Additional Description
IP Setup Commands
Set unit name
EX5$CN}
Ipn•X5$]
Reset unit name to factory
default
E•CN} Ipn•X5(]
Read unit name
ECN} X5$] or X5(]
Set time and date
EX5%CT}
Ipt•X5%]
See Symbol Definitions on page 53
for more details.
Read time and date
ECT} X5%]
Set GMT offset
EX5@CZ} IpzX5@]
NOTE: In the command, the divider between hours and minutes can be either a colon or a period. In the response,
the divider is a colon.
Example:
E8.0CZ} Ipz+08:00]
Read GMT offset
ECZ} X5@]
Set Daylight Saving Time
EX7%CX} IpxX7%]
Read Daylight Saving Time
ECX} X7%]
Set DHCP on
E1DH} Idh1]
Set DHCP off
E0DH} Idh0]
NOTE: Setting DHCP from on to off will reset the IP address to factory default (192.168.254.254).
View DHCP mode
EDH} X5#]
Set IP address
EX5^CI}
Ipi•X5^]
Read IP address
ECI} X5^]
Read hardware address (MAC)
ECH} X5*]
Iph•X5*]
00-05-A6-xx-xx-xx = MAC
address
Verbose mode 2 and 3
Read # of open connections
ECC} X8(]
0 - 200 = number of open
connections
NOTES: X5@ = GMT offset –12.0 through +14.0 hours and minutes removed from GMT
X5# = DHCP mode status 0 = off or disabled
1 = on or enabled
X5$ = Unit name Text string up to 24 characters (A-Z, 0-9, and "-").
Not case sensitive.
X5% = Time and date (set and read) MM/DD/YY•HH:MM:SS
X5^ = IP/Gateway address nnn.nnn.nnn.nnn, Factory default IP address: 192.168.254.254
X5* = Hardware (MAC address) nn.nn.nn.nn.nn.nn
X5( = Default Name Combination of model name and last 3 pairs of MAC address
(SMX-00-02-3D)
X7% = Daylight savings time 0 = Daylight Savings Time off or ignore
1 = Daylight Savings Time on (USA)
2 = Daylight Savings Time on (Europe)
3 = Daylight Savings Time on (Brazil)
X8( = Number of open connections 0 - 200