User guide

61
8.2.21 Creang presets
By pressing the ENTER buon, the SmartMatriX² will ask you to conrm. Select Yes, your screen is memorized
as a preset.

In Matrix mode, you will nd a new menu into Preset menu called “Preset management”. This will help you
to dene what kind of preset you want to save:
 preset saved for both outputs,
 preset saved only for the current output,
 preset saved only for output #1,
 preset saved only for output #2.
The 8 user presets of the SmartMatriX² can be recalled at any stage during your show or event.
1. Press the PRESET buon, then press one of the eight rst preset buons to choose which memory (#1 to
#8) you wish to use.
2. Once you have selected your preset, simply press the TAKE buon to view the result on your main screen.

Into the audio menu, you will nd some audio adjustments:

- NO AUDIO: the audio of your device is switched o
- PRESET MODE: the standard mode of use of the device
You have two possibilies:
▪ the sound on the output will follow the audio input of the top layer.
▪ Breakaway: when breakaway is acvated, the audio on the output is memorized into the preset. A change
of preset, changes the audio on the output. A change of content into a video layer has no eect on the
audio.
- ROUTING MODE: in this conguraon, simply choose an audio input to assign it to the output. The audio
conguraon remains the same during the show.
 into this menu you will have access to all source sengs:

 select to mute the input
select to choose between mono or stereo input
set up the analog gain of your analog input (0 for 4dBu)
 select to adjust the input audio level and right and le balance.

 choose the digital audio output mode
dene the main or prelist audio sengs:

 the sound on the output will follow the audio input of the top layer.
when breakaway is acvated, the audio on the output is memorized into the preset. A change
of preset, changes the audio on the output. A change of content into a video layer has no eect on the
audio.
 select to mute your master audio
 select to choose between mono or stereo output
 set up the analog gain of your analog output (4dBu by default)
 set your master volume of the output
set the right/le balance of your output.