User guide

47
7.4 Live
The Live mode is designed for easy live operaon of the device aer you have created some presets.
On the right, you will nd all your saved presets under the tab called “MASTER MEMORIES”.
A simple drag and drop on the screen will load your preset into the screen (Program or
Preview).
If you want to change an input into your preset into the live mode, simply use the le source ribbon and drag
and drop your input into a layer.
You can sll use the load master memory to load a master memory from the memory of the device or the
RCS² using the following windows.
Please click on SAVE MASTER MEMORIES and then choose a number to save the current preset of the unit
into a master memory.
You can load at any moment a frame or a logo in the same way into a frame or logo layer.
To acvate the QUICK FRAME, simply press the Quick Frame buon (located on the right side of each screen).
Remember that a preset saved into a screen with a 1024x768 resoluon, will keep its size into a screen of
higher resoluon. Therefore, it is best to save preset memories only aer you have congured the output
resoluon.
You sll have access to the LOAD/SAVE/RESET preset feature.
Once your preset is ready to send, use the T-bar, or the TAKE buon.
You sll have access to STEP BACK buon.
7.4 Live